Start with the wall, not the frame
Before you choose a mount type or size for Sunny Wombat Smiles by Charles Davis, decide where the piece will live. This is Australian wildlife wall art made to order, so the wall you pick determines the size that will feel right and the finish that will suit the room.
Measure the available height and width, note where light falls during the day, and check what the wall is made of. Those three details will guide every choice that follows, from print-only to acrylic face mount to a stained oak timber frame.
A practical hanging sequence
Work through these checkpoints in order so you order the right variant the first time. Each step uses information confirmed in the product record.
- Confirm your wall space: Measure the height and width you can give the piece. All images work on a 2 x 3 aspect ratio, so your space should suit that proportion.
- Choose the mount type: Decide between Print Only, Acrylic Face Mount and Stained Oak Timber Frame. Each changes the look, the border and the finished dimensions.
- Allow for the border: Print Only and framed prints include a 1'' white border around the image with the print title, print number and signature in the border. Acrylic Face Mounts have no border, and the title, number and signature are written on the print itself along the bottom edge.
- Add the frame allowance if relevant: For framed prints, the frame and matting board add an extra 7'' to the overall height and width of the finished product. Factor that into your wall measurement before ordering.
- Plan for the lead time: Each piece is made to order based on your sized and mounting requirements. Allow 2-3 weeks for your order to be created, and tracking is sent by email once it is on its way.
Print Only, Acrylic Face Mount or Stained Oak Frame
The three finishes suit different walls and different levels of commitment. Here is how they compare using the supplied product details.
- Print Only: Printed on archival fine art smooth rag, described as made to last as long as you do. Comes with a 1'' white border containing the print title, print number and signature. Available in 37 x 54 cm up to 104 x 155 cm. Best if you plan to frame it yourself or store it flat until framing.
- Acrylic Face Mount: Printed on metallic paper with a gloss finish that makes snow images pop and shimmer. No border; the title, number and signature sit on the print along the bottom edge. Described as a floating piece of glass on your wall. Available in 35 x 51 cm up to 102 x 152 cm.
- Stained Oak Timber Frame: Archival fine art smooth rag in an Italian-made wood frame. The signature, print title and print number sit in a 1'' border between the matt board and the image. The frame and matting board add 7'' to overall height and width. Available in 56 x 73 cm and 72 x 98 cm.
What the Sunny Wombat Smiles print gives you
- Sunny Wombat Smiles' by Charles Davis: Fine art photography from multi-award-winning Australian photographer Charles Davis, made to order based on your sized and mounting requirements. Explains why you choose the size and mount before ordering, and why the piece is not sitting on a shelf waiting to ship.

Sunny Wombat Smiles' by Charles Davis - Sunny Wombat Smiles' by Charles Davis: Print Only is printed on archival fine art smooth rag, described as made to last as long as you do. Supports choosing Print Only if you want a durable base for your own framing.
- Sunny Wombat Smiles' by Charles Davis: Acrylic Face Mounts are printed on metallic paper with a gloss that makes snow images pop and shimmer, and the product is described as like a floating piece of glass on your wall. Helps you decide if the borderless, glossy look suits your room better than a matted frame.
- Sunny Wombat Smiles' by Charles Davis: The frame and matting board add an extra 7'' to the overall height and width of the finished product. Prevents ordering a framed size that will not fit your measured wall space.
Choosing a size that fits the room
The variant list gives you a clear range for each finish. Use these as your starting points, then check the border and frame allowances above before committing.
- Smaller walls and hallways: Print Only at 37 x 54 cm or 53 x 79 cm, Acrylic Face Mount at 35 x 51 cm or 51 x 76 cm, or the Stained Oak Timber Frame at 56 x 73 cm.
- Living areas and feature walls: Print Only at 70 x 104 cm or 87 x 130 cm, Acrylic Face Mount at 68 x 102 cm or 85 x 127 cm, or the Stained Oak Timber Frame at 72 x 98 cm.
- Large statement pieces: Print Only at 104 x 155 cm, or Acrylic Face Mount at 102 x 152 cm. Measure twice at this scale, especially if the piece will sit above furniture.
Hanging tips for wildlife photography
For a borderless acrylic face mount, treat the print edge as the visual edge of the work. Because there is no border, the image sits closer to the surrounding wall, so a little breathing room on each side helps it read as a single floating piece.
For Print Only and framed versions, the 1'' white border is part of the design and carries the title, print number and signature. Do not trim or cover it. If you frame a Print Only piece yourself, choose a frame and mat that leave that border visible.
Keep the piece out of direct, harsh sunlight where you can. The supplied information describes the papers as archival, but it does not include specific light-fastness figures, so treat this as sensible placement rather than a manufacturer instruction.
The photographer's work focuses on Australian wildlife in the Snowy Mountains of New South Wales, and the acrylic metallic finish is specifically described as making snow images pop. If your room has cooler or neutral tones, the gloss finish will lean into that; a stained oak frame will warm the same image up.
What to confirm before you order
The supplied product record does not include hanging hardware, wall-fixing instructions or a weight specification for any variant. Check those details with the store or your installer before drilling, particularly for the largest sizes.
The record also does not list care instructions for cleaning the acrylic face or the framed print. Ask before using any cleaner on the surface.
Finally, remember that every piece is made to order. The 2-3 week creation window is part of the process, not a delay to chase, so order with that timeline in mind if the print is a gift or needed for a specific date.


